|
This high capacity incubator humidifier provides continuous accurate control, water metering and direct display of current incubator humidity in % Relative Humidity for larger incubators.
Control of incubator humidity is the no.1 cause of confusion and misunderstanding in incubation procedure, frequently resulting in poor hatching rates.
The solution to the problem is Brinsea's new H222 Digital Incubator Humidity Management Module which suits most large fan-assisted incubators (over $1,000 chicken eggs) and provides continuous, direct and highly accurate relative humidity (% RH) readout. It also controls the amount of water evaporated within the incubator to maintain the humidity level set by the user.
The new Humidity Module now features a digital display which clearly and continuously shows the Relative Humidity (RH) within the incubator, allowing you to both accurately monitor and if necessary adjust the humidity level in forced draught incubators as required, in order to help ensure maximum hatching success.
The Humidity Module will compensate for fluctuations in ambient humidity level, day or night, and allows the user complete control over incubation environment.
The module stands beside the incubator, and is connected to it by a thin electrical lead and a flexible tube for water supply. The sensor mounts through a 25mm (one inch) diameter hole in the incubator wall. The H222 is suitable for many incubator brands holding from 1,000 eggs up to about 10,000 eggs.
For smaller incubators, the H22 provides the same facilities but with a smaller pumping capacity, suitable for incubators up to about 1,000 eggs.
|